|
1st stage is to remove the old headlights, indicators, finishing strip below headlight and front grille.
Follow the procedure in the owners handbook under ‘bulb replacement’ in order to remove the headlight and indicator, in case you do not have a handbook, click here to view the relevant pages.
As you remove the various connectors, label them for easy reference.
To remove the finishing strip below the light, remove the crosshead screw - accessed from the wheelarch, the strip then pulls out from the slot in the front grille. The screw passes through a hole in the front wing lip, retained into a metal connector, clipped onto the finishing strip - retain this metal connector for use on the new finishing strip.
Remove the front grille by unscrewing the 3 screws along the top of the grille. Then prise out the plastic retainers and lift out the grille - it also has to plastic prongs located along its bottom edge that sit into holes in the car body.
Next, remove the 2 plastic deflectors (one either side of the grille) by drilling out the rivets - these deflectors can be discarded.
Now remove the headlamp electric leveling motors (if fitted) just turn the motor body until the prongs align with the cut outs in the metal and lift the motor out.
|
